Knowledgebase
How to reset BIOS
23 June 2011 10:27 AM

How to reset the BIOS to default.

There are 3 ways to reset the BIOS back to default settings.

1) Load BIOS Failsafe default. 

To load BIOS Failsafe default, go into the BIOS and just load BIOS Failsafe default.  It can be found on the main BIOS menu or in the Exit menu.

2) Change the Jumper setting of JP1. (Consult manual to make sure there it is JP1)

To be safe, make sure turn off your computer.

The jumper on JP1 are on Pins 1 and 2. Move the jumper to Pins 2 and 3 for 3 seconds then place it back onto Pins 1 and 2.

3) Remove the CMOS battery.

Remove the CMOS battery for about 2 minutes and then place the battery back.



Help Desk Software by Kayako Fusion