With 80G SSD dick everything (Windows 7) work great, but after replace it with new HDD ( Hitachi HDD 5K750 750GB) system mostly stops in Bios phase (sometimes with only _ in top left corner or black screen. Sometime I can enter into BIOS, but system hang up after few movement thru menus. If system go over BIOS, Windows work without problem.
I check with restored Win7 from SSD and with fresh Windows (delete all partition before installation).
Z-Spot ZOTAC Forums
Page 1 of 1
ID80 hanging in BIOS with Hitachi HDD 5K750
#3
le_willard 
- Advanced Member
-
- Group: Moderators
- Posts: 1,322
- Joined: 18-July 11
- Gender:Male
- Location:Behind 7 proxies
-
Interests:Cycling
Gaming
Computer building
Posted 06 July 2012 - 04:47 PM
Hi Oldi,
Sorry to hear you're having hard drive compatibility issues. Please send an email to support@zotacusa.com. They can better assist you.
Sorry to hear you're having hard drive compatibility issues. Please send an email to support@zotacusa.com. They can better assist you.
#4
Oldi
- n00b
-
- Group: Members
- Posts: 3
- Joined: 25-June 12
Posted 12 July 2012 - 09:46 PM
Retailer suggest me to change BIOS. I’m not doing that before because of bad experience with flashing BIOS from Windows – on other machine.
After do that (in Windows 7 with stopped antivirus and disconnected from internet) ID80 wake up only from USB flash drive. With any SATA disk they blocked in BIOS with black screen.
My last chance was making DOS bootable flash disk with everything for flashing BIOS. And yes, after flashing in DOS, machine work also with Hitachi HDD.
After do that (in Windows 7 with stopped antivirus and disconnected from internet) ID80 wake up only from USB flash drive. With any SATA disk they blocked in BIOS with black screen.
My last chance was making DOS bootable flash disk with everything for flashing BIOS. And yes, after flashing in DOS, machine work also with Hitachi HDD.
Share this topic:
Page 1 of 1