[oggy1989]

i have a very annoying problem when i have 1 monitor plugged in via dvi the temps on my card are as normal which are 37c idle 75c load but when i plug a second monitor in weather it be through the second dvi port or the 1 hdmi port the card has, the temps shoot up to 65c idle and 93c load which is ridiculous, is there a fix for this as i have been forced to only use 1 monitor instead of 2 , would appreciate a fast reply thankyou

(could i need to update my cards bios maybe - would this fix it?)

[julianperezpesce]

oggy1989, on 19 March 2012 - 04:40 AM, said:

i have a very annoying problem when i have 1 monitor plugged in via dvi the temps on my card are as normal which are 37c idle 75c load but when i plug a second monitor in weather it be through the second dvi port or the 1 hdmi port the card has, the temps shoot up to 65c idle and 93c load which is ridiculous, is there a fix for this as i have been forced to only use 1 monitor instead of 2 , would appreciate a fast reply thankyou

(could i need to update my cards bios maybe - would this fix it?)

You should update bios, and nvidia drivers there is a new version today. i read, that when u use dual monitor gpu goes from 2d mode (single monitor) to 3d low profile (in dual monitor) so gpu get stressed and overheat, i dunno if gtx 560 ti 448 have a bios update this can be fixed with that, and i found this solution too for you : I think. Turns out it was due to use of a dvi->hdmi cable on the main monitor. I wonder why that would cause such overheating. Switched to dvi, single and dual monitor setups now have same temps. this could be caused for a problem with bios card´s. You can try this Guidetoo



good luck and sorry for my bad english its not my language, consult another card if have this problem and considerer RMA in that case

This post has been edited by julianperezpesce: 19 March 2012 - 06:46 AM

[oggy1989]

i already have them nvidia drivers, iv had them for 2 days now and its still the same, i have also tried the fix in tht link and it makes my temps go back to normal but my main monitor goes blank in the process leaving me with a different problem : ( , how do i flash the latest bios on to the card and were do i find it, thank you for your help

[julianperezpesce]

oggy1989, on 19 March 2012 - 09:33 AM, said:

i already have them nvidia drivers, iv had them for 2 days now and its still the same, i have also tried the fix in tht link and it makes my temps go back to normal but my main monitor goes blank in the process leaving me with a different problem : ( , how do i flash the latest bios on to the card and were do i find it, thank you for your help

first at all, publish wich guide work for you to cooldown your gpu, second having a blank monitor you can fix it with a dualmonitor software, searching one for you.

Ultramon i ll try to find one free for you, good luck and sorry for my english


i found this web better for your needs, here you will find many programs, some free versions and other are pays, good luck men

This post has been edited by julianperezpesce: 19 March 2012 - 03:09 PM

[oggy1989]

i followed this guide My link and it worked, but not fully, temps dropped but in the process my main monitor went blank for some reason so i am no better off unless i can get the monitor back on with ultramon you say? , i allready have ultramon installed on my system, how do i get the monitor back on thanks for your help

This post has been edited by oggy1989: 20 March 2012 - 03:28 AM

[julianperezpesce]

oggy1989, on 20 March 2012 - 03:25 AM, said:

i followed this guide My link and it worked, but not fully, temps dropped but in the process my main monitor went blank for some reason so i am no better off unless i can get the monitor back on with ultramon you say? , i allready have ultramon installed on my system, how do i get the monitor back on thanks for your help

i cant help you i dont have dual monitors, but, im sure that in google.com u can find some guide about use it, or meaby in ultramon forum´s o FAQ´s

[nut]

oggy1989, on 19 March 2012 - 04:40 AM, said:

i have a very annoying problem when i have 1 monitor plugged in via dvi the temps on my card are as normal which are 37c idle 75c load but when i plug a second monitor in weather it be through the second dvi port or the 1 hdmi port the card has, the temps shoot up to 65c idle and 93c load which is ridiculous, is there a fix for this as i have been forced to only use 1 monitor instead of 2 , would appreciate a fast reply thankyou

(could i need to update my cards bios maybe - would this fix it?)

I will consult with an engineer with you about this issue - this is quite new to me on our video cards.

[oggy1989]

thank you nut, how long till you no some more information regarding my problem?

[supaahiro]

oggy1989, on 21 March 2012 - 06:49 AM, said:

thank you nut, how long till you no some more information regarding my problem?

Hi oggy1989,

Which specific Model Number / Part Number of GTX560Ti do you have?

Thanks

[nut]

Yes, our engineer is inquiring about your setup. Can you provide more details?

[oggy1989]

supaahiro, on 21 March 2012 - 10:11 AM, said:

Hi oggy1989,

Which specific Model Number / Part Number of GTX560Ti do you have?

Thanks

where do i find the model number part number ? i think this is the part number ....... 299-2N207-001ZT ...... what info can you get with that number?

This post has been edited by oggy1989: 22 March 2012 - 11:30 AM

[oggy1989]

nut, on 21 March 2012 - 12:25 PM, said:

Yes, our engineer is inquiring about your setup. Can you provide more details?

well my setup is as follows:
23inch lg 3d monitor (main monitor)
samsung 32 inch tv ( second screen hooked up so i can view movies and such on a the bigger tv

whenever i have both of the monitors plugged in via any of the ports, ie display port - hdmi - dvi the temps go up 20 - 25c , i have done a bit of searching and i think it could be to do with the bios or maybe a bad card, my friend has the same card a zotac 560ti 448 and his temps are fine with 2 monitors plugged in, i think it also maybe to do with the graphics card staying in 3d mode when it should really be down-clocking to 2d mode, i really want this sorting as i have to keep on plugging in and out my monitors depending on which 1 i want to use is there any more development on this matter?

my part number is 299-2N207-001ZT

This post has been edited by oggy1989: 22 March 2012 - 11:31 AM

[supaahiro]

oggy1989, on 22 March 2012 - 11:28 AM, said:

well my setup is as follows:
23inch lg 3d monitor (main monitor)
samsung 32 inch tv ( second screen hooked up so i can view movies and such on a the bigger tv

whenever i have both of the monitors plugged in via any of the ports, ie display port - hdmi - dvi the temps go up 20 - 25c , i have done a bit of searching and i think it could be to do with the bios or maybe a bad card, my friend has the same card a zotac 560ti 448 and his temps are fine with 2 monitors plugged in, i think it also maybe to do with the graphics card staying in 3d mode when it should really be down-clocking to 2d mode, i really want this sorting as i have to keep on plugging in and out my monitors depending on which 1 i want to use is there any more development on this matter?

my part number is 299-2N207-001ZT

Hi oggy1989,

Can you also provide the Model Number? It starts with ZT. Should look like this: ZT-xxxxx-xxx.

Thanks

[oggy1989]

supaahiro, on 22 March 2012 - 12:14 PM, said:

Hi oggy1989,

Can you also provide the Model Number? It starts with ZT. Should look like this: ZT-xxxxx-xxx.

Thanks

model number ZT-50313-10M

[oggy1989]

any update on this matter, as im getting sick to death of it now ?

[oggy1989]

oggy1989, on 25 March 2012 - 06:40 AM, said:

any update on this matter, as im getting sick to death of it now ?

?

[supaahiro]

I have replied to oggy1989's PM about this. Sorry for the inconvenience.