[dmccloud]

Alright, I have seen several questions on this forum regarding the location/existence of an SPDIF input pinout on the ZOTAC ZT-84MEG5M-HSL card. I have seen the response that the SPDIF connector is the three pin, white, keyed connector. This is supposed to be the case even though it is not labeled as an SPDIF connector. Adding further confusion, my particular card, has a label SPDIF IN with an arrow pointing to the VGA pin header (See my attached photo. The label is just to the left of the VGA header, between it and the screw. The arrow is underneath the black plug, out of view.).

Can someone finally put this thing to bed and clear up the confusion on this connector and tell us exactly how to connect an SPDIF sound source to it? I would think someone from Zotac or someone that has actually hooked this up would be able to shed some light.

Thanks for any help on this!

Attached thumbnail(s)

• 

[supaahiro]

The attached picture shows the pinout of the connector. Black wire is ground and white wire is the signal.

Attached thumbnail(s)

•