[deffer]

Hello!

Here now my problem.
My zotac box id10.

1. I have installed Win 7 in AHCI Mode. Install is ok.
I have imaged the Win 7 installation with all drivers and programs.

2. I have 4 Zotac Boxes with the same Bios config. AHCI Mode is enabled.
The Image install runs fine. After the reboot, Win won't start. I will boot from the Win boot disk no Problem.
But when the Box is booting from disk or other mediums, mouse and keyboard is not available.
Now i reboot the Box, the keyboard is available, at half way from booting (disk), the keyboard doesn't gives any response.

3. I have switched from AHCI to IDE compatible.
The box booting from the disk, mouse and keyboard is available. But windows can't boot normal. The repair function, can't repair the installation.

Please, i need help fast and quickly!

This post has been edited by deffer: 17 January 2011 - 02:32 AM

[nut]

I'm not sure if you covered this but have you tried manually installing windows on each computer from the install disk? Perhaps a slipstreamed cd would be an alternative solution instead.

[hmos215]

;
; change win7 sata driver to ahci
; boot using ide
; modify registry
; boot to bios
; change to sata to ahci

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci]
"Start"=dword:00000000